- Support duress codes, with different behavior than the normal codes: https://en.wikipedia.org/wiki/Duress_code
- Add mechanism for custom events, e.g. detect/react to power outage (e.g. analog card stays powered but channel bank T1 immediately goes down, custom relay, etc.)
- Add ability to auto-record using configurable IP phone. As soon as an alarm is triggered, recording would start, with the recording saved locally and streamed to the alarm server in realtime (in case the audio is needed later after a legitimate breach). On disarm, the recording is stopped/deleted, but if a duress code is used, the recording is not deleted. On alarm breach, recording would continue until a non-duress disarm/system reset, and recording would not be auto-deleted.
- Alarm siren volume should increase as time elapses during a trigger
Comments
You must be logged in to leave a comment.